Wiegand 26/34, RS485, RS232 Proximity Card Reader (ERFID08M)
About Use
When the card approach the reader, the red light turn into green,
after glinting to turn redcolor again, the buzzer sound shows
transiting data. It has 500ms proximity time distance for card
proximity. After finishing card proximity, if the same ID card is
still in the proximity range, reader will not send out the data,
neither giving any sound hint. But for Different ID card entering
Proximity Area, Reader can do response continually and send out the
data
Specification
@ Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output
@ Less than 0.2 second Response Speed
@ Less than 0.5 seconds Proximity Time Distance:
@ 2-15cm Proximity Range
@ Support UEM 4100 ID Card or compatible with it( 64bits,
Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)
@ -25º C to 75º C Ambient Temperature, 10%-90% Ambient Humidity
@ Built-in Antenna
@ Built-in LED (Double Color LED)
@ Built-in Loud Speaker (Buzzer)
@ DC 12V Working Voltage, 70mA Working Current
@ 100 Meters Communication Distance
@ Real Time Data Transfer
@ Black Color
@ PVC Case Material (Black Resin for Water-Proof Function)
@ 119mm*53mm*25mm
Installation
Using + type screw driver to loosen the screw between the panel and
motherboard. And then embed the motherboard to the side wall with
the plastic plug and screws.
Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive
anode and cathode of power supply
2. When external Power is used, make sure sharing the power with
Controller Box or using the same GND
3. When the distance between card reader and controller is more
than 50m, please use Power Line with at least 1.5 square cm Dia, or
using several parallel Network wires.
|
|
|
Shenzhen Huiqitong Xing Electronic Co., Ltd.
Ework is one of the largest suppliers of Offline Single Door Access
Control, RFID Reader, Direct TCP/IP Connectivity Access Controller
System and Time Attendance System in China.
In 1997, Ework introduced its first Stand alone Access Control
System (Q2000 & E2002) and has always been popular for 10 years
because of its smart, convenient, easy use and operate. Especially
from 1997 to 1999, we are the only one manufacturer for Q2000 that
have been copied by many other manufacturers. That is why you can
see so many Q2000 similar models in the market.
In 2000, Ework developed completed new technology products: Direct
Connectivity TCP/IP Protocol Net Work Access Controller (E.
LAN-DT02) and Time Attendance (E. LAN-TA01/02) with first SQL
Server Database and Client/Server-based (Web Based) Integrated
Security Management System named 'Netsys'.
Asp Software Version is also available now for meeting market
requirements of easy and convenience operation.
There are now hundreds of Netsys Systems running all over the
world, and it is especially most popular for Airport, Government
Office, Bank, Multi National Company, Metro System and Remote Tele
Station Control, etc. 'One Card Solution'(Access Controller, Time
Attendance and POS) is widely used in Large Factory and High
University.
No access system is complete without readers, and Ework takes pride
in providing one of the widest ranges of Erfid 08 Series readers
(From Erifd 08A to Erfid 08Z). Total 100000 RFID Reader is
successfully applied in different Area, which is available for 125
kHz, 13.56 MHz, ISO15693, 14444 technology or customized
specifications.
Our 30 R&D engineers release new technology very often.
Security Guard Patrol, 2.4G Car Parking Reader and Wireless ZigBee
System will come up the market very soon.
